QualiTest NDT provides specialised Non-Destructive Testing (NDT) services in the Aviation, Medical and General Engineering sectors. Our inspectors have extensive experience in aviation NDT and consultancy, working with various companies and different sized aircraft.
Based in Collombey-le-Grand (VS) Switzerland, we offer a European & Worldwide service using the expertise of our technicians, and we guarantee quality of service and reliability.
Our technical knowledge and organisational structure can be measured in relation to our numerous approvals:
Authorisation from the Swiss Federal Office of Aviation (FOCA) in accordance with EASA-145, certificate n° CH.145.0199 - D1 “Specialised Services” for NDT
Continental Motors Approval for Ultrasonic Inspection of 6 Cylinder Crankshafts in accordance with Mandatory Service Bulletin MSB96-10B & FAA AD 97-26-17
Health & Safety is of paramount importance to QualiTest NDT. That's why we have developed a Safety Management System (SMS) to provide a framework for leadership at all levels within the company.
Our highly qualified and experienced professionals go through rigorous training that meets or exceeds industry standards (Level III & II in accordance with European Norm EN4179 & EN473).
QualiTest NDT , The Right Choice
Quality Management System Certified to ISO 9001
Fully Qualified NDT Engineers to EN4179 & EN473, conversant in English and EASA-145 Regulations
35 years experience in all NDT methods
Contracted Level 3 Services
Efficient , cost effective , professional
Safety will not be compromised under any circumstance
Full support on all quality matters
Non-Destructive Inspection Services
Specialising in Quality Inspection Services in Aerospace, Medical and General Engineering sectors
What We Can Offer
Our array of activities is worldwide. Inspection work undertaken varies from large commercial aircraft to small series of components. No job is too demanding or too small, each inspection carried out goes through the same meticulous care and attention.
Aerospace NDT Inspection / EASA Part-145
Due to our strategic alliance with AOG Inspection Ltd in the UK we are able to offer a wide and comprehensive expert service to our clients .
Visual Inspection (VT)
Visual inspection, with or without optical aids, is the original method of NDT. Many defects are surface-breaking and can be detected by careful direct visual inspection.
Ultrasonic Inspection (UT)
Ultrasonic methods of NDT use beams of mechanical waves (vibrations) of short wavelength and high-frequency, transmitted from a small probe and detected by the same or other probes.
Liquid Penetrant Inspection (PT)
Penetrant Inspection is one step up from visual inspection using visible red penetrants for small welded components to large vessels or sensitive fluorescent penetrants for high specification inspection such as the aerospace industry.
Eddy Current Inspection (ET)
In eddy current testing, a coil carrying an AC current is placed close to the specimen surface, or around the specimen.
Magnetic Particle Inspection (MT)
This method is used for the detection of surface and near-surface flaws in ferromagnetic materials and is primarily used for crack detection of any shape or heat treated condition.
Radiographic Inspection (RT)
Radiography uses X-rays or gamma-rays to produce an image of an object on film. The image is usually natural-size.
Paint Inspection is the assessment of the application of protective paint coatings on steel or other surfaces. A correct protective coat is crucial in determining the service life of a component. Incorrect application can lead to corrosion of steel and premature failure of items.
Rope Access Inspection
Rope Access NDT is a technique fast growing in the UK. and we are offering it as a unique new concept to NDT in Switzerland. It is used as a compliment to most other NDT techniques. Being fully qualified in accordance with I.R.A.T.A (INDUSTRIAL ROPE ACCESS TRADE-ASSOC.) specifications required by most European countries including the HSE in the United Kingdom and the SUVA in Switzerland.
At QualiTest, we implement, structure and improve your Integrated Management System (IMS) using and our simple and effective tools made available to you based on the proven skills of our consultants. Your Management System must adapt perfectly to your requirements and those of your stakeholders, based on the international standards you have selected, such as ISO 9'001, ISO 14001, ISO 22000, ISO 27001 or ISO 45 001 for example .
QualiTest have been Certified to ISO 9'001 since 1995
Ropelink Ltd has worked with QualiTest NDT since 2002 where they have provided us high quality NDT services in sometimes remote overseas locations with high end prestigious clients. Ropelink has also worked for QualiTest NDT on various important time restricted contracts in Switzerland. We welcome the opportunity to work with QualiTest NDT in the future.
Rehan Siddiqui – Director
Our precision engineering workshop is active in subcontracting in turning / milling for various sectors of activity, in particular Transportion and Amusement Park rides . We manufacture complex parts subject to production standards to ensure safe operation under extreme operating conditions. QuaiTest NDT checks the conformity of our parts before delivery. Their expertise is a guarantee of trust and quality for our customers!
We thank them for their collaboration.
Cédric Zermatten - Management
I have known Mr Weedon since 1992 when we worked together as a team inspecting parts for F18 fighter aircraft in Switzerland. When Mr Weedon and a colleague founded QualiTest NDT in 2000, they employed me as their Nominated Level 3 to oversee the Aviation activities carried out in accordance with EASA Part 145 regulations. I have worked with them since that date and know them to be a high quality organisation striving to achieve the highest possible standards of inspections.
Engineer NDT / EN473 Level 3
QualiTest NDT Sàrl
En Bovéry A
Tel: +41 (0)24 472 94 14
Mobile: +41 (0)79 228 58 63
For any general inquiries, please fill in the following contact form: