Our array of activities is worldwide. Inspection work undertaken varies from large commercial aircraft to small series of components. No job is too demanding or too small, each inspection carried out goes through the same meticulous care and attention.
What We Can Offer
Aerospace NDT Inspection / EASA Part-145
Due to our strategic alliance with AOG Inspection Ltd in the UK we are able to offer a wide and comprehensive expert service to our clients .
This method is used for the detection of surface and near-surface flaws in ferromagnetic materials and is primarily used for crack detection of any shape or heat treated condition.
In eddy current testing, a coil carrying an AC current is placed close to the specimen surface, or around the specimen.
Penetrant Inspection is one step up from visual inspection using visible red penetrants for small welded components to large vessels or sensitive fluorescent penetrants for high specification inspection such as the aerospace industry.
Visual inspection, with or without optical aids, is the original method of NDT. Many defects are surface-breaking and can be detected by careful direct visual inspection.
Ultrasonic methods of NDT use beams of mechanical waves (vibrations) of short wavelength and high-frequency, transmitted from a small probe and detected by the same or other probes.
Radiography uses X-rays or gamma-rays to produce an image of an object on film. The image is usually natural-size.
At QualiTest, we implement, structure and improve your Integrated Management System (IMS) using and our simple and effective tools made available to you based on the proven skills of our consultants.Your management system must adapt perfectly to your requirements and those of your stakeholders, based on the international standards you have selected, such as ISO 9'001, ISO 14001, ISO 22000, ISO 27001 or ISO 45 001 for example .
Certified ISO 9'001 since 1995
(1st consulting office in Switzerland)
Paint Inspection is the assessment of the application of protective paint coatings on steel or other surfaces. A correct protective coat is crucial in determining the service life of a component. Incorrect application can lead to corrosion of steel and premature failure of items.
Rope Access NDT is a technique fast growing in the UK. and we are offering it as a unique new concept to NDT in Switzerland. It is used as a compliment to most other NDT techniques. Being fully qualified in accordance with I.R.A.T.A (INDUSTRIAL ROPE ACCESS TRADE-ASSOC.) specifications required by SUVA.
QualiTest NDT Sàrl
En Bovéry A
Tel: +41 (0)24 472 94 14
Mobile: +41 (0)79 228 58 63
Engineer NDT / EN473 Level 3
For any general inquiries, please fill in the following contact form:
QualiTest NDT , The Right Choice
Quality Management System Certified to ISO 9001
Fully Qualified NDT Engineers to EN4179 & ÊN473, conversant in English and EASA-145 Regulations
35 years experience in all NDT methods
Contracted Level 3 Services
Efficient , cost effective , professional
Safety will not be compromised under any circumstance
Full support on all quality matters
QualiTest NDT provides specialised Non-Destructive Testing (NDT) services in the Aviation, Medical and General Engineering sectors. Our inspectors have extensive experience in aviation NDT and consultancy, working with various companies and different sized aircraft.
Based in Collombey-le-Grand (VS) Switzerland, we offer a European & Worldwide service using the expertise of our technicians, and we guarantee quality of service and reliability.
Our technical knowledge and organisational structure can be measured in relation to our numerous approvals:
Authorisation from the Swiss Federal Office of Aviation (FOCA) in accordance with EASA-145, certificate n° CH.145.0199 - D1 “Specialised Services” for NDT
Teledyne Continental Motors Approval for Ultrasonic Inspection of 6 Cylinder Crankshafts in accordance with SI 1285E
Health & Safety is of paramount importance to QualiTest NDT. That's why we have developed a Safety Management System (SMS) to provide a framework for leadership at all levels within the company.
Our highly qualified and experienced professionals go through rigorous training that meets or exceeds industry standards (Level III & II in accordance with European Norm EN4179 &EN473).
Version française en construction. Pour la version complète en anglais, cliquez ci-dessus.
This page is under construction